Braindump2go Free Exam Dumps with PDF and VCE Collection
https://www.mcitpdump.com/new-210-065-dumpsreal-210-065-pdf-dumps-free-download-from-braindump2goq170-q180.html
Export date: Thu Mar 28 16:21:57 2024 / +0000 GMT

[New 210-065 Dumps]Real 210-065 PDF Dumps Free Download from Braindump2go[Q170-Q180]


2018/Sep Braindump2go 210-065 Exam Dumps with PDF and VCE New Updated Today! Following are some new 210-065 Real Exam Questions:

1.|2018 Latest 210-065 Exam Dumps (PDF & VCE) 354Q&As Download:

https://www.braindump2go.com/210-065.html

2.|2018 Latest 210-065 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/0B75b5xYLjSSNOG12eFhPdTJkRFU?usp=sharing

QUESTION 170
Cisco TelePresence Immersive Endpoint devices support a feature that allows objects, documents, or PC applications to be presented in a plug-and-play fashion. What is this feature called?

A. Cisco TelePresence Content Sharing
B. Cisco TelePresence Auto Collaborate
C. Cisco TelePresence Multichannel
D. Cisco TelePresence Content Stream

Answer: B

QUESTION 171
Which two video endpoints can you set back to factory reset by using physical button presses? (Choose two.)

A. Cisco TelePresence C40
B. Cisco TelePresence EX90
C. Cisco TelePresence C60
D. Cisco TelePresence SX20
E. Cisco TelePresence C90

Answer: BD

QUESTION 172
A network administrator is manually configuring a Cisco TelePresence MX300 endpoint. Which two pieces of information must the administrator introduce, in order for the system to properly register to a Cisco Unified Communications Manager or to a Cisco TelePresence Video Communications Server? (Choose two.)

A. the MAC address of the Cisco TelePresence MX300 endpoint
B. a SIP URI
C. the name of the Cisco Unified Communications Manager server or Cisco VCS server
D. an IP address for the endpoint

Answer: AB

QUESTION 173
A Cisco SX20 is registered to Cisco Unified Communications Manager. It cannot place calls. It is configured with SIP URI 1007 and when traces are run, SIP Forbidden and Unknown calling DN errors are found.
Which statement describes the problem?

A. The wrong network IP address is assigned to device.
B. The ACL is blocking port 5060 from device.
C. H.323 is not configured correctly.
D. SIP URI does not contain IP address or hostname.

Answer: D

QUESTION 174
In which two locations can you find registration information for a video endpoint? (Choose two.)

A. from the endpoint touch panel on the Settings > System Information screen
B. from the endpoint web interface on the Home screen
C. from the Cisco VCS in the Status > System screen
D. from the Cisco TMS on the Systems > Provisioning screen

Answer: AB

QUESTION 175
Which two methods can be used to retrieve the status of a Cisco TelePresence codec endpoint? (Choose two.)

A. From the codec web GUI, choose Troubleshooting > System Status.
B. From the codec web GUI, choose Diagnostics > System Status.
C. From the codec web GUI, choose Configuration > System Status.
D. Run the xstatus command from the CLI.
E. Run the xcommand status command from the CLI.

Answer: CD

QUESTION 176
Refer to the exhibit. An H.323 endpoint that is registered to Cisco VCS Control is not able to make B2B calls. Calls to other internal endpoints are working fine.
What is the likely cause of the issue?

A. The Conductor H.323 zone is set to "Off."
B. The Traversal Zone H.323 zone is set to "Off."
C. The Production CUCM H.323 zone is set to "Off."
D. The Traversal Zone H.323 zone is in a "Failed" state.

Answer: B

QUESTION 177
A video engineer has opened a ticket with Cisco TAC for support and the TAC engineer has requested system information such as software version of Cisco VCS. Where does the video engineer find this information?

A. System
B. Maintenance
C. Configuration
D. Status

Answer: D

QUESTION 178
Refer to the exhibit. Which option performs a factory reset of a Cisco TelePresence System endpoint?

A. Configuration > System Settings
B. Configuration > Security Settings
C. Troubleshooting > Hardware setup
D. Monitoring
E. Troubleshooting > Configuration Issues
F. Troubleshooting > System Restart
G. Cisco TelePresence System endpoint can be reset only via CLI.

Answer: E

QUESTION 179
What is the proper procedure to manually reset a password on a Cisco TelePresence EX Series endpoint running software version TC7?

A. Use SSH to access the device and use the username "cisco" and the password "TANDBERG."
B. Hold down the mute key on the touch display for 25 seconds and reset the password using the touch screen.
C. When the device is powered down, hold down the power button until the power light blinks twice, then press the power button twice.
D. Tap the power button four times within ten seconds and then use Telnet to connect to the device IP address.
E. Tap the power button five times while the device is powered off and when it boots, use Telnet to connect to the device within 60 seconds.

Answer: C

QUESTION 180
In order to perform a password recovery for the admin user on a Cisco VCS appliance, what must an engineer do?

A. Connect via Telnet to the Cisco VCS.
B. Connect to the serial port.
C. Connect via SSH.
D. Connect to LAN port 1.

Answer: B


!!!RECOMMEND!!!

1.|2018 Latest 210-065 Exam Dumps (PDF & VCE) 354Q&As Download:

https://www.braindump2go.com/210-065.html

2.|2018 Latest 210-065 Study Guide Video:

YouTube Video: YouTube.com/watch?v=TapzX2YXqBk 2 1

" href="https://youtu.be/TapzX2YXqBk">

YouTube Video: YouTube.com/watch?v=TapzX2YXqBk 2 1


Links:
  1. http://www.youtube.com/watch?v=TapzX2YXqBk
  2. http://www.youtube.com/watch?v=TapzX2YXqBk
Post date: 2018-09-27 06:36:54
Post date GMT: 2018-09-27 06:36:54

Post modified date: 2018-09-27 06:36:54
Post modified date GMT: 2018-09-27 06:36:54

Export date: Thu Mar 28 16:21:57 2024 / +0000 GMT
This page was exported from Braindump2go Free Exam Dumps with PDF and VCE Collection [ https://www.mcitpdump.com ]
Export of Post and Page has been powered by [ Universal Post Manager ] plugin from www.ProfProjects.com