This page was exported from Braindump2go Free Exam Dumps with PDF and VCE Collection [ https://www.mcitpdump.com ] Export date:Fri May 17 13:23:03 2024 / +0000 GMT ___________________________________________________ Title: [April-2021]300-435 Exam Dumps Free Download in Braindump2go 100% 300-435 Real Questions[Q78-Q97] --------------------------------------------------- April/2021 Latest Braindump2go 300-435 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 300-435 Real Exam Questions!QUESTION 78Which environment must be enabled to complete the Zero-Touch Provisioning process on a Cisco IOS XE device?A. TCLB. ZTP OPEN Service ContainerC. EEMD. Guest ShelfAnswer: DExplanation:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-5/configuration_guide/prog/b_165_prog_3850_cg/zero_touch_provisioning.pdfQUESTION 79Which function is available in NETCONF and unavailable in RESTCONF?A. configuration changes are automatically activated B. uses the YANG data models to communicateC. supports JSON and data encodingD. validates the content of a candidate datastoreAnswer: DExplanation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/169/b_169_programmability_cg/configuring_yang_datamodel.htmlQUESTION 80When accessing the /device-detail endpoint in Cisco DNA Canter, what is an acceptable SearchBy parameter value?A. platform typeB. IP addressC. software versionD. MAC addressAnswer: DQUESTION 81Which setting is used for the dampening period when configuring an on-charge publication for YANG- push versus OpenConfig?A. nullB. -1C. 0D. 1000Answer: CExplanation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/1612/b_1612_programmability_cg/model_driven_telemetry.htmlQUESTION 82Refer to the exhibit. A RESTCONF GET request is sent to a Cisco IOS XE device. A portion of the response is shown in the exhibit.Which module name corresponds to the YANG model referenced in the request?A. ietf-interfaces:ietf-ipv4B. iana-if-type:ethernetCsmacdC. ietf-interfaces:interfacesD. ietf-interfacesAnswer: AQUESTION 83Which two factors influence the location accuracy of a device using Scanning APIs? (Choose two.)A. AP placementB. device manufacturer/OSC. client device orientationD. battery life of the deviceE. amount of device antennasAnswer: ACExplanation:The geo-location coordinates (latitude, longitude) and X,Y location data accuracy can vary based on a number of factors and should be considered a best effort estimate. AP placement, environmental conditions, and client device orientation can influence X,Y estimation; experimentation can help improve the accuracy of results or determine a maximum acceptable uncertainty for data points.Reference: https://developer.cisco.com/meraki/guides/location-services-solution-guide/QUESTION 85Which two Cisco DNA Center features are needed to add legacy devices on the platform? (Choose two.)A. multivendor SDK supportB. trusted device profile updateC. device package creationD. device package downloadE. device profile replicationAnswer: BCQUESTION 86Which path do calls begin with to implement Cisco DNA center Intern APIs?A. /intentB. /dna/v1C. /dna/api/intent/v1D. /dna/system/api/v1/Answer: DExplanation:https://developer.cisco.com/docs/dna-center/#!device-provisioning/endpoints-and-methods-usedQUESTION 87A programmer is creating a Maraki webhook Python script to send a massage to Webex Teams. Which two elements should be configured to create this script? (Choose two)A. gRPC credentialsB. Webex Teams access tokenC. XML formatted requestD. user authentication countE. webhook server secretAnswer: BDQUESTION 88What are two characteristics of REST API calls? (Choose two.)A. unencryptedB. non-cacheableC. statelessD. implemented over HTTPE. parameters passed in the headersAnswer: CDExplanation:https://www.cisco.com/c/en/us/td/docs/wireless/mse/8-0/MSE_REST_API/Guide/Cisco_MSE_REST_API_Guide/REST_Introduction.pdfQUESTION 89Refer to the exhibit. A Python script is used to configure a Cisco IOS XE device. The script must be updated to print the IP addresses of all the loopback interfaces.Which statement should be added before the loop? A. interfaces = response.json()["ietf-interfaces:interfaces"]B. interface = response.json()["ietf-interfaces:interfaces"]C. interface = response.json()["ietf-interfaces:interfaces"]["interface"]D. interfaces = response.json()["ietf-interfaces:interfaces"]["interface"]Answer: DExplanation:https://blog.wimwauters.com/networkprogrammability/2020-04-04_restconf_python/QUESTION 90Refer to the exhibit. A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit.What is the YANG data node that is referenced in the response? A. route is a leaf listB. static-routes is a containerC. static-routes is a listD. routing-instance is a containerAnswer: AExplanation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.pdfQUESTION 92What is a capability of MV Sense MQTT API?A. request and subscribe to historical, current, or real-time dataB. automate the configuration of networking devicesC. monitor the network and auto adjust for optimal performanceD. create email alerts for user that violate the security configurationAnswer: AExplanation:https://developer.cisco.com/meraki/mv-sense/#!mv-sense-overview/introductionQUESTION 93Drag and Drop QuestionDrag and drop the characteristic from the left onto the monitoring type described on the right. Answer: Explanation:https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/telemetry/70x/b-telemetry-cg-ncs5500-70x/b-telemetry-cg-ncs5500-70x_chapter_010.htmlQUESTION 94Drag and Drop QuestionDrag and drop the steps from the left into the order on the right to create an end-to-end flow for Meraki Splash Screen using EXCAP. Answer: QUESTION 95Drag and Drop QuestionDrag and drop the code from the bottom onto the box where the code is missing in the Ansible playbook to apply the configuration to an interface on a Cisco IOS XE device. Not all options are used. Answer: QUESTION 96FILL BLANKFill in the blank to complete the statement.___________________ is a solution for automating the configuration of a device when it is first powered on, using DHCP and TFTP.Answer: Zero-touch provisioningExplanation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/169/b_169_programmability_cg/zero_touch_provisioning.htmlQUESTION 97Drag and Drop QuestionRefer to the exhibit. A GET request is issued to the Cisco DNA Center REST API. Drag and drop the GET request URL subpaths from the left onto the objectives on the right. Not all options are used. Answer: Explanation:https://meraki.cisco.com/lib/pdf/meraki_whitepaper_captive_portal.pdfResources From:1.2021 Latest Braindump2go 300-435 Exam Dumps (PDF & VCE) Free Share:https://www.braindump2go.com/300-435.html2.2021 Latest Braindump2go 300-435 PDF and 300-435 VCE Dumps Free Share:https://drive.google.com/drive/folders/1aZd2kZQpLrc_X9Zy57wn5fhkgF2IMSG5?usp=sharing3.2021 Free Braindump2go 300-435 Exam Questions Download:https://www.braindump2go.com/free-online-pdf/300-435-PDF-Dumps(78-97).pdfFree Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams! --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2021-04-14 04:17:56 Post date GMT: 2021-04-14 04:17:56 Post modified date: 2021-04-14 04:17:56 Post modified date GMT: 2021-04-14 04:17:56 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com